?>

Amplifiers

Model Shown:

SYS1041-0XX Series

Amplifier
Click Image to Enlarge

L/S BAND 300W,500W, 1,000W Standalone or 1:1 Redundant

RF Characteristics
  • Frequency Range: See Options Below
  • RF Output Power: 300W, 500W, 1,000W, 2,000W CW Minimum at P1dB/P3dB (GaN) Compression Pt
  • RF Output Level Adjust: 20dB in 0.1 dB steps
  • RF Input Power: 0dBm nominal, +10dBm Maximum
  • Input/Output VSWR: 1.5:1 Maximum (Ref 50 Ohms)
  • Output Protection: No Oscillation, No Damage into infinite VSWR, at any Phase Angle (Internally Protected)
  • Noise Figure: 10dB Maximum
  • Spurious Outputs: No greater than –65 dBc
Frequency Range Options
  • 1750 - 1850 MHz
  • 2025 - 2120 MHz
  • 1750 - 2120 MHz
  • Call factory for other options
Controls & Reporting
  • LCD Color Touch screen
  • Interface: Ethernet UDP/IP, RS-232 or RS-422
  • Control Signals: Output Power Adjust (0.1dB steps)
  • Reported Signals: Forward and Reflected Power, Power in dBm or Watts, Temperatures, Current, Voltage, elapsed running time.
Power Supply Characteristics
  • AC Input Power: 180-264 VAC Single or Three Phase 4 Wire Y, 47-63 Hz, 1.5kW / 2.0KW Maximum
  • Efficiency: >40% Typical AC input to RF Output Power
Specification Sheet Downloads