?>

Flight Termination Systems

Model Number Shown:

RX2001 Series

Quad Mode Command Destruct Verification Receiver supports EFTS, IRIG, FSK, High Alpha mission formats
FTS Receiver / Decoder
Click Image to Enlarge
Features
  • Color High Res Touchscreen with tabbed pages
  • Synthesized LO Frequency Selection
  • User Adjustable Sensitivity Threshold
  • State of the Art DSP Decoder Technology
  • Local and UDP/IP Remote Control and Status
  • High Accuracy Peak Deviation / RF Input Power Reporting
  • Large Touch screen LCD Displaying Frequency, RF Power & Deviation and more.
  • Frequency Range 370.0 to 450.0MHz in 1.0kHz Steps
  • LO Frequency Stability ±0.0005% (±5PPM) Maximum over Operating Environment/24 hours
  • Noise Figure 6dB Maximum
  • Spurious & Image Rejection 60dBc Minimum
  • LO Reradiation -60dBm Maximum
  • RF Input Impedance 50 Ohm Nominal
  • RF Input VSWR 2:1 Maximum
  • RF input dynamic range -104 to +13dBm
  • Relative Signal Strength indication monotonic, via front panel LCD and RS-232 ±2dB
  • IF -3dB Bandwidth 500±150kHz
  • IF -60dB Bandwidth 1500±50kHz
  • Operating temperature range 0 to +50°C
  • Operating Relative Humidity 0 to 95%
  • Operating Altitude 0 to 10,000 Feet
  • Calendar lifetime 10 Years Minimum
  • Operational lifetime 20,000 hours Minimum
  • MTBF 2,0000 hours Minimum
  • MTTR (Mean Time To Repair) 1 hour maximum down to card level
Decoder Characteristics
  • Number of IRIG Tones : 20 Channels
  • -2dB Tone Bandwidth 1% maximum
  • -20dB Tone Bandwidth 4% maximum
  • Simultaneous Tone detection up to 6 Tones
  • Decoder Carrier Deviation ±15 to ±35kHz for each tone
  • Decoder Response Time 10 milliseconds maximum
Interface Characteristics
  • Carrier Presence Reporting
  • Active Tone(s) Reporting
  • Carrier Deviation Reporting
  • Signal Strength Reporting
  • Frequency Tune/Reporting
  • Self Test Reporting
  • Deviation Reporting ±7% of Received Carrier Deviation over -85dBm to +13dBm
  • Optional discrete IRIG Tone/Command outputs Dry Contact / TTL Levels
  • Via UDP/IP, binary format reporting of all IRIG/High Alpha/FSK message parameters and EFTS fields data
Remote Communications
  • RS-232 & Ethernet UDP/IP
Specification Sheet Downloads